Turn on the faucet and let the last of the water trickle out to completely drain the water lines. To remove the handle, take off the screw cover; use a screwdriver or Allen wrench to remove the screw. Depending on the age of your faucet, you may not have an adjusting ring. Unscrew and remove the adjusting ring.
When you're done, close and cover the sink drain with a small rag to catch any small parts you may drop as you're working. Step 3: After removing the screw cover on the faucet handle, use a screwdriver to lift off the actual handle. (If your faucet has a hex screw, you'll need an 1/8-inch Allen wrench to remove it.)
Two-handled faucets come in three styles: those with compression valves, those with cartridges, and those with ceramic disk valves. Virtually all contemporary .
Delta single-handle ball valve faucets are among the least troublesome to repair, although the fact the valve is spring loaded can make disassembly a little .
How to Repair a Delta Brand Kitchen Faucet. How to replace all of the gaskets and springs in a Delta brand Single-Handle kitchen faucet. These are also called
Disassemble your Delta Single Handle Kitchen Faucet Ball and seat assembly to check for cracked gaskets and leakage, or to replace the taps. Step 1 Delta Single Handle Kitchen Faucet disassembly. Loosen set screw and remove faucet handle. Using channel lock pliers or pipe wrench remove locking cap to expose valve.
Reassembly is straightforward in Delta kitchen faucet repair and other models. Drop the springs in the recesses and press the rubber seats over the top with your .
